RAM 4500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
Backing Plate: Service and Repair
Removal
REMOVAL
1. Remove wheel and tire assembly.
2. Remove the disc brake caliper See: Disc Brake System/Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper -
Removal .
3. Remove the caliper adapter See: Disc Brake System/Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper Adapter -
Removal .
4. Remove the rotor See: Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and Replacement/Brake Rotor - Removal .
5. Remove the axle shaft See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Axle Shaft/Service and
Repair/Rear Axle - 9 1/4/Removal .
6. Remove the park brake shoes See: Brake Shoe/Service and Repair/Removal and Replacement/Removal .
7. Remove the parking brake cable from the brake lever.
8. Remove the bolts (2) attaching the support plate (1) to the axle and remove the support plate.