RAM 4500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
1. Raise and support the vehicle.
2. Remove the brake line (2) located at the axle.
3. Remove the mounting bolt (4) for the brake hose (3) at the axle.
4. Remove the banjo bolt (2) at the caliper.
5. Remove the hose (3).
Front Brake Hose - Heavy Duty (HD)
FRONT BRAKE HOSE - HEAVY DUTY (HD)
1. Install the hose (5).
2. Install the mounting bolt (2) for the brake hose (5) at the axle.
3. Install the brake hose banjo bolt (4) at the caliper.
4. Reinstall the wheel speed sensor wire (3) to the brake hose (5).
5. Remove the support and lower the vehicle.
6. Bleed the brake system See: Brake Bleeding .
Rear Tube / Hose Assembly
REAR TUBE / HOSE ASSEMBLY