RAM 4500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
![background image](/dodge/ram_4500_chassis_cab_2wd/l6-6.7l_dsl_turbo/Page-2080003.png)
INPUT SPEED SENSOR
1. Lubricate the output speed sensor o-ring with MOPAR(R) AS68RC ATF.
2. Install the input speed sensor into the transmission case.
3. Tighten the bolt to 8 Nm (70 in.lbs.).
4. Install the electrical wiring connector onto the input speed sensor.
5. Lower vehicle.
6. Verify the transmission fluid level. Add MOPAR(R) AS68RC as necessary.