RAM 4500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
Wheel Bearing: Service and Repair
Front Hub / Bearing - Removal
4X2 - Independent Front Suspension
4X2
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the brake caliper and rotor See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Brake Rotor - Removal .
4. Remove the ABS wheel speed sensor if equipped (4), See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Wheel Speed
Sensor/Service and Repair/Front Wheel Speed Sensor - Removal
5. Remove the three hub/bearing mounting bolts (5) from the steering knuckle (3).
6. Slide the hub/bearing (1) out of the steering knuckle (3).
7. Remove the brake dust shield (2).
2500 & 3500 - 4WD - Link/Coil
2500 & 3500 - 4WD
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the hub extension (1) mounting nuts and remove the extension from the rotor if equipped.