RAM 50 2WD L4-156 2556cc 2.6L VIN 7 2-bbl (1983)
FIGURE 2
The control lever-stopper plate for the KM 145 transmission (Figure 1) has been changed in shape as illustrated in Figure 2 for better identification. This
will prevent wrong installation of the stopper plate. For your information, the part number of the stopper plate remains unchanged after this modification.
PRECAUTION FOR INSTALLATION
CARE MUST BE EXERCISED TO ENSURE THAT THE STOPPER PLATE IS NOT INSTALLED IN THE WRONG DIRECTION. IMPROPER
INSTALLATION OF THE STOPPER PLATE WILL CAUSE POOR GEAR SHIFTING.
Effective Date:
From October, 1982.
POLICY:
Information only
NOTE:
Each of the above illustrations shows the top view of the stopper plate. The hatched area shows the depression as shown below.