RAM 50 4WD L4-143 2.3L DSL Turbo VIN J FI (1983)
FIGURE 1 - MODIFICATION OF THERMO VALVE "A" VACUUM HOSE ASSEMBLY. FOR L.D.V. COLT CHALLENGER/ SAPPORO MODEL PASS CARS
1.
Modify thermo valve "A" hose harness described as follows (Figure 1):
A.
Remove connector "I" from thermo valve "A" and cut all three hoses off of connector "I". Reinstall upper vacuum hose "E" on thermo valve
nipple "E" (Figure 1, Views A and B).
B.
Cap nipple "A" on thermo valve "A" with supplied Rubber Cap PN MD026761 (Figure 1, View B).
C.
Cut vacuum hose "B" 2-23/64" from end of hose at connector "I" and install supplied Vacuum Hose Terminal (Tee) PN MD001865 (Figure
1, Views A and B).
D.
Connect vacuum hose "A" on hose terminal (tee) nipple "B" (Figure 1, Views B and C).
2.
Revise basic timing as outlined below:
1.4L and 1.6L Colt