RAM 50 4WD L4-143 2.3L DSL Turbo VIN J FI (1983)
FIGURE 1 - IDLE-UP ADJUSTING (F.I.D.C.)
2.
Make sure curb idle speed is within the specified speed and reset it by readjusting the speed adjusting screw (SAS 1) if necessary (refer to Group
0) - Figure 1.
3.
Switch the air conditioning ON.
4.
Adjust the engine speed to 1050 + or - 50 rpm with the throttle opener setting screw.
5.
Turn the air conditioner switch ON/OFF several times to check the throttle opener for operation (lever up/down).
Colt/Ram-50
Page 0-19 - *FICD Adjustment for Air Conditioning Unit (whenever adjusting the idle speed)
1.
Setting conditions:
^
Coolant temperature 185 to 205~F (85 to 95~C)
^
All lights and accessOFF ories
^
Transmission Neutral
^
Parking brake Apply
^
On vehicles with power steering, set the tires in the straight ahead position to prevent the pump from being loaded.
FIGURE 1 - IDLE-UP ADJUSTING (F.I.D.C.)
2.
Make sure curb idle speed is within the specified speed and reset it by readjusting the speed adjusting screw (SAS 1) if necessary - Figure 1.
3.
Switch the air conditioning ON.
4.
Adjust the engine speed to the specified speed with the throttle opener setting screw (SAS 2) - Figure 1.
*FICD - Fast Idle Control Device
5.
Turn ON/Off the air conditioner switch several times to check the throttle opener for operation (lever up/down).
Tune-Up Specification of FICD