RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
NOTE: Relay #4 shown, all others similar.
4. Remove the control wire nuts (1) and disconnect the control wires (2) from each relay.
Installation
INSTALLATION
NOTE: Relay #4 shown, all others similar.
1. Install the control wires (2) to all the relays and install the nuts (1).
2. Tighten the nuts to 3 Nm (25 in. lbs.).
3. Install the red battery positive cable (1) and install the switch wire.