RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
REAR DOOR SEAL
1. Position the rear door seal to the bottom of the door opening, with bulb facing outboard, starting the installation at the center of the lower flange.
Press the seal onto the sill flange and work around the perimeter of the door opening until fully seated. Work in one direction, smoothing the seal
to avoid puckers or wrinkles.
2. Install the lower c-pillar trim (1) See: Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim Panel-Installation .
3. Install the lower b-pillar trim (1) See: Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim .