RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
6. Route the seat belt (3) through the slot in the lower B-pillar trim panel (1) and position the trim panel to the B-pillar (2).
7. Engage the retaining tabs that secure the lower B-pillar trim panel to the B-pillar.
8. Install the upper B-pillar trim panel See: Pillar Trim/B-Pillar Trim .
9. Install the rear door sill trim cover See: Scuff Plate/Service and Repair/Installation .
10. Install the cowl trim panel See: Cowl Trim/Cowl Trim - Installation .
Removal
REMOVAL
REGULAR CAB
1. Remove the cap (1) and then the bolt (2) that secures the seat belt (3) to the top of the B-pillar (4) and position the seat belt out of the way.
2. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the upper B-pillar trim panel (5) to the B-pillar and remove the
trim panel.
QUAD CAB