RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
9. Install the grab handle (1) onto the B-pillar and install the two bolts (3). Tighten the bolts to 6 Nm (55 in. lbs.).
10. Close the two fastener covers (2) located on the grab handle.
Lower
REMOVAL
1. Remove the upper C-pillar trim panel See: Pillar Trim/C-Pillar Trim Panel-Removal .
2. Remove the bolt (3) that secures the seat belt (2) to the bottom of the C-pillar (4) and position the seat belt out of the way.
3. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the lower C-pillar trim panel (1) to the C-pillar.
4. Remove the seat belt from the lower C-pillar trim panel through the slot provided and remove the trim panel.
Upper
REMOVAL
1. Remove the cap (1) and then the bolt (2) that secures the seat belt (3) to the top of the C-pillar (4) and position the seat belt out of the way.
2. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the upper C-pillar trim panel (5) to the C-pillar and remove the
trim panel.
Lower
INSTALLATION