RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
4. Install a new pivot bolt (1) and tighten to 25 Nm (18 ft. lbs.).
5. Install the center seat back See: Center Armrest / Seat Back/Installation .
INERTIA HINGE
NOTE: Do not reuse the seat fasteners, always replace with new ones.
1. Install the inertia hinge (3) onto the center seat back (2) and install new bolts (1).
2. Tighten the bolts (1) to 25 Nm (18 ft. lbs.).
3. Install the seat back inertia hinge covers See: Center Seat Back Inertia Hinge Cover/Installation .
4. Install the center seat back See: Center Armrest / Seat Back/Installation .