RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
Oil Pan: Procedures
Cleaning
CLEANING
Remove all gasket material from the oil pan and cylinder block sealing surfaces. Extra effort may be required around T-joint areas. Clean oil pan and
flush suction tube with a suitable solvent.
Inspection
INSPECTION
Inspect the oil pan, suction tube, and tube braces for cracks and damage. Replace any defective component. Inspect the oil drain plug and drain hole
threads. Inspect the oil pan sealing surface for straightness. Repair any minor imperfections with a ball-peen hammer. Do not attempt to repair an oil pan
by welding.