RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
2. Install the two screws (1) that secure the recirculation door actuator (2) to the air inlet housing (3). Tighten the screws to 1.1 Nm (10 in. lbs.).
3. Connect the HVAC wire harness connector (4) to the recirculation door actuator.
4. Install the glove box See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Instrument Panel Glove Box -
Installation .
5. Reconnect the negative battery cable.