RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
Evaporator Temperature Sensor / Switch: Service and Repair
Removal
REMOVAL
NOTE: Illustration shown with instrument panel removed for clarity.
1. Disconnect and isolate the negative battery cable.
2. Remove the glove box from the instrument panel See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and
Repair/Instrument Panel Glove Box - Removal .
3. Disconnect the HVAC wire harness (1) from the evaporator temperature sensor (2) located on the top of the HVAC housing (3).
4. Remove the evaporator temperature sensor from the HVAC housing by pulling the sensor upward while tipping it forward.