RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor - Removal
5.9L/6.7L DIESEL
The Camshaft Position Sensor (CMP) on the diesel engine is located below the fuel injection pump (1). It is bolted to the back of the timing gear cover.
1. Disconnect electrical connector (5) at CMP sensor.
2. Remove sensor mounting bolt (6).
3. Carefully twist sensor from timing gear cover.
4. Check condition of sensor o-ring.