RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
Canister Purge Solenoid: Service and Repair
Removal
REMOVAL
The duty cycle EVAP canister purge solenoid (1) is located in the engine compartment below and near the battery.
1. Carefully pull the solenoid assembly straight up from the tongue-type bracket without bending the two vapor lines.
2. Disconnect electrical wiring connector (2) at solenoid.
3. Disconnect vapor line quick-connect fitting (3) at solenoid.
4. Disconnect vapor line quick-connect fitting (4) at solenoid.