RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
1. Unsnap the trim cover (4) from the front seat belt turning loop (3) and discard.
2. Remove the screw (5) that secures the seat belt turning loop to the height adjuster (1) on the upper C-pillar.
3. Remove the seat belt turning loop from the height adjuster.
4. Remove the upper trim (2) from the inside of the C-pillar. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar
Trim/C-Pillar Trim Panel-Removal .
5. Loosen the two screws that secure the height adjuster far enough to remove the adjuster from the upper C-pillar.
6. Disengage the tab of the height adjuster from the slot in the sheet metal and remove the adjuster from the inside of the C-pillar.