RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
Pitman Arm: Service and Repair
Pitman Arm - Removal
2500 & 3500
2500 & 3500
1. Remove the drag link nut (2) from the pitman arm (1).
2. Install puller C-3894-A (3) and separate the drag link (2) from the pitman arm (1).
3. Mark the pitman arm (2) and shaft positions for installation reference. Remove the nut (3) and washer (4) from the pitman arm (2).
4. Remove the pitman arm (4) with Puller 9615 (2) or an equivalent pitman arm puller tool.
4500 & 5500
4500 & 5500