RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
Tilt Wheel Handle: Service and Repair
Installation
INSTALLATION
1. Route the rod (2) into the tilt lever release knob bracket (1).
2. Install the tilt lever release knob bracket (3) to the column and install the two new mounting screws (1). Tighten the two screws to 4.5 Nm (40 in.
lbs.).
3. Install the lower shroud.
4. Install the steering column opening cover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Steering Column Opening Cover - Installation .