RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
ALL LD & HD EXCEPT 4X4 HD
1. Install the coupler to the steering rack & pinion using the marks made in the removal process.
2. Install the coupler to the intermediate shaft using the marks made in the removal process.
NOTE: New pinch bolts must be used for reinstallation.
3. Install the lower pinch bolt and tighten to 57 Nm (42 ft. lbs.).
4. Install the upper pinch bolt and tighten to 57 Nm (42 ft. lbs.).
5. Install the left front tire and wheel assembly See: Wheels and Tires/Service and Repair/Removal and Replacement .
6. Lower the vehicle.
7. Reconnect the negative battery cable.
8. Unlock the steering wheel.