RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
Tie Rod End: Service and Repair
Tie Rod End - Removal
Outer Tie Rod End - Independent Front Suspension
OUTER TIE ROD END
NOTE: Do not twist the boot anytime during removal or installation.
1. Loosen the jam nut (3).
2. Remove the outer tie rod end nut from the ball stud.
3. Separate the tie rod ball stud (1) from the knuckle with Remover 9360 (2).
4. Unthread the outer tie rod end (1) from the inner tie rod.
Inner Tie Rod End - Independent Front Suspension
INNER TIE ROD END
1. Remove the outer tie rod end (1) Count the number of turns when removing, this will aid in setting the toe after installation. See: .
2. Remove the jam nut (3).