Ram Raider L4-2555cc 2.6L SOHC (1987)
Ignition Cable: Technical Service Bulletins
Spark Plug Cable - Removal, Manual Correction
Models
1987 "SJ" (Ram Raider)
Subject
Spark Plug Cable Removal Service Manual Correction
Index
ELECTRICAL
Date
March 23, 1987
No..
08-09-87 (C16-08)
P-927
An illustration error in the 1987 Ram Raider Service Manual Volume 2 (publication #81-370-7016A) requires correction. The page involved is as
follows:
Group 8 - Electrical - Page 8-113
^
Service points of removal (illustration) titles "Good" and "No Good" should be reversed.
NOTE:
PLEASE PASTE, STAPLE, OR TAPE NEW PAGE IN PROPER PLACE.
POLICY:
Information only
IGNITION SYSTEM - Ignition System
SERVICE POINTS OF REMOVAL
1-4. CAUTION OF SPARK PLUG CABLES/7. HIGH TENSION CABLE
The cable is to be pulled out by grasping the cap part.
9.
REMOVAL OF DISTRIBUTOR Before removing the distributor, position the piston in No. 1 cylinder at the top dead center on compression
