Ram Raider L4-2555cc 2.6L SOHC (1987)
Alignment: Service and Repair
Camber
FRONT
Adjust number of shims between upper arm shaft and arm post of side frame. The normal shim package thickness is 0.12 inch. A change of 0.039 inch in
thickness of shim pack will provide a change of approximately 13 minutes in camber adjustment. Camber adjusting shims are available in thicknesses of
0.039 and 0.079 inch.
REAR
Rear camber is pre-set during vehicle assembly and cannot be adjusted. If camber is not within specifications, check for worn or damaged suspension
component, and damaged or deformed floor pan or body and repair as needed.
