Ram Raider V6-2972cc 3.0L SOHC (1989)
Insert a plastic trim tool between the trim clip (bushing) and trim clip (pin), and then pry the trim clip to remove.
NOTE: If the trim clip (bushing) and trim clip (pin) come off together, separate the trim clip assembly from the trim and install the trim clip
(bushing) at the door side. Then improvise a tool (such as shown in the illustration) to remove the trim clip (pin).
SERVICE POINTS OF INSTALLATION
8. Application Of Adhesive To Waterproof Film
Apply a coating of specified adhesive to the position shown in the illustration, and then attach the waterproof film.
Specified adhesive: MOPAR Rope Caulk Sealer 3/16 x 80" roll Part No. 4026044 or equivalent.