Ram Raider V6-2972cc 3.0L SOHC (1989)
Rear Door Handle: Service and Repair
REMOVAL STEPS
1. Back door trim and waterproof film. Adjustment of outside handle
2. Back door garnish bracket
3. Back door garnish
4. Outside handle
5. Inside handle
6. Back door latch
7. Back door lock actuator
NOTE: Reverse the removal procedures to reinstall.
BACK DOOR LOCK ACTUATOR INSPECTION
Connect the battery source to the actuator terminal, and check the shaft for operation. If the shaft moves in opposite direction when the connection
polarity is changed, the actuator should be considered to be in normal condition.