Rampage L4-135 2.2L (1983)
Arm Rest: Customer Interest
Center Armrest - Rattles/Loose
Models
All 1983 Omni, Horizon, Rampage & Scamp
Subject
Center Armrest Rattle or Looseness
Index
BODY
Date
July 6, 1983
No.
23-03-83
P2379C
SYMPTOM/CONDITION
Loose feeling or rattle of center armrest due to excessive spacer clearance.
PARTS REQUIRED
1 - Spacer Kit
PN 4282596
REPAIR PROCEDURE
1.
Apply parking brake lever to allow armrest to move to the rear. From underside of armrest, remove the two (2) Phillips head screws holding the
armrest to the slide at the rear.
2.
Release parking brake lever and move armrest forward. From underside of armrest, remove the four (4) Phillips head screws holding the armrest to
the slide at the front, and remove armrest.
3.
Remove and record position of the three (3) shouldered screws holding the slide to the main bracket.
4.
Carefully remove slide and discard old spacers.
5.. From underside of slide, position each new spacer from Spacer Kit PN 4282596 through slide and install shoulder screw through slot and into spacer.
