dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

High Altitude Conversion Packages|Page 1112 > < High Altitude Conversion Packages|Page 1110
Page 1
background image

Idle Speed: By Symptom

Technical Service Bulletin # 140983

Date: 830321

Engine - Slow and/or Rough Idle Cold

Models

1983 2.2L Passenger Cars W/Auto Trans.. Federal & High Altitude Emissions & 1983 2.2L Trucks W/Auto. Trans. Calif. Emissions

Subject

Slow and/or Rough idle Cold

Index

FUEL

Date March 21, 1983

No.

14-09-83

P-837-C
SYMPTOM/CONDITION

Subject model vehicles may exhibit the following driveability condition. After cold starting, engine may idle slow and/or rough.

NOTE:

This service applies only to vehicles with carburetors PN 4227375 and 4227376 built prior to February 5, 1983 (MDH 02-05-XX).

PARTS REQUIRED

1 - Authorized Modification Label

PN 4275086

REPAIR PROCEDURE

1.

Reset hot fast idle speed to 1375 rpm on step 3 of fast idle cam. Refer to 1983 Service Manual #81-270-3004, page 14-42, Item #5, for correct
adjustment procedure.

It is suggested that the hot fast idle specification be changed on this page (14-42, Item #5) to the new speed of 1375 rpm for carburetors PN
4227375 and 4227376.

FIGURE 1

2.

Type the following information on the Authorized Modification Label PN 4275086 (see Figure 1).

Upper Section

High Altitude Conversion Packages|Page 1112 > < High Altitude Conversion Packages|Page 1110