Rampage L4-135 2.2L (1983)
FIGURE 6 - FUEL RESERVOIR AND PRESSURE REGULATOR CONNECTIONS
2.
To mount the pressure regulator, tape the pressure regulator bracket template, PN 4275240, to the right side shock tower as shown in Figure
5. (Set aside solenoid when equipped to gain access.) Carefully locate the template against the fender shield and wheel well, being careful to
keep the top side of the template level. Center punch three screw hole locations and drill three .165" diameter (#21 drill) holes. Attach the
pressure regulator bracket, PN 4306973, with three self-tapping screws, PN 6031991, and tighten securely (Figure 6).
