Rampage L4-135 2.2L (1983)
E.
Clean head surface adjacent to the timing belt cover above the water pump. Remove the tape from the adhesive-backed cylinder
head-to-timing belt cover closure. Install as shown in Figure 4 with adhesive side against the head.
POLICY:
Reimbursable within the provision of the warranty
TIME ALLOWANCE:
Labor Operation No.
09-10-10-17
0.2 Hrs.
Case/Cover Timing Belt - Replace (Only)
09-10-02-90
0.7 Hrs.
Adjust Belt Timing and Replace Cover
FAILURE CODE:
41 - Foreign Material
