Rampage L4-135 2.2L (1983)
FIGURE 1
REPAIR PROCEDURE
Installation Procedure
1.
Carefully remove and save secondary throttle return spring (Figure 1). Remove vacuum line from solekicker.
2.
Remove the vacuum throttle kicker from carburetor. Use an 11 mm socket wrench.
FIGURE 2
3.
Check the stroke identification number on top of the idle rpm adjusting screw on the removed solekicker (it will be stamped "4" or "55")
(Figure 2).
Select and install from the parts list the correct stoke solekicker package. If stamped "4" use PN 4293882. If stamped "55" use PN 4293881.
4.
Remove and save the wire guide loop from carburetor and nylon vacuum line.
