Rampage L4-135 2.2L (1983)
Coolant Temperature Sensor/Switch (For Computer): Customer Interest
Ignition System - Cold Drive Sag On During Acceleration
Models
All 1983 2.2L - 2V Front Wheel Drive Vehicles Federal & California Automatic & Manual Transmission
Subject
Cold Drive Sag Occurring During Acceleration
Index
DRIVEABILITY
Date
March 11, 1985
No.
18-01-85
SYMPTOM/CONDITION
A condition may occur on subject model vehicles which consists of a cold drive sag on medium or heavy acceleration during the engine warm up period.
PARTS REQUIRED
Driveabilitv Package PN 4342949
Contains the following:
1 - Wiring Harness Overlay
NPN
1 - Coolant Temperature Sensor
PN 4267281
2 - 1/4" Rubber Vacuum Caps
PN 3580172
1 - Hose Routing Label
NPN
2 - Tie Straps
PN 6015756
Must be ordered separately:
1 - Authorized Modification Label
PN 4275086
1 -
Grease
PN 4318063
1 -
ESA Module for appropriate application:
Federal/Automatic
PN 5227029
Federal/Manual
PN 5227028
California/Automatic
PN 5227036
California/Manual
PN 5227035
REPAIR PROCEDURE
1.
Disconnect battery. Remove and replace original ESA module with the appropriate part number selected from parts list above.
2.
Remove the coolant temperature switch located in thermostat housing and replace with coolant temperature sensor from package.
