Rampage L4-135 22L (1983) Fuel Pressure Regulator Vapor Lock/Fuel Foaming Issue
FIGURE 2-D
3.
Remove the following wires from the instrument panel side of the bulkhead connector (Figure 2-D):
a.
Yellow wire from cavity #9.
b.
Black/red or gray/red from cavity #34 (if so equipped).
FIGURE 2-A - INSTRUMENT PANEL WIRING
Install the yellow wire just removed from bulkhead connector into the loose natural colored 1-way connector supplied in the instrument panel
overlay harness, PN 4331801. If the vehicle was equipped with a black/red or gray/red wire from cavity #34, tape back to main instrument
panel harness (Figure 2-A).
