Rampage L4-135 2.2L (1983)
^
1985-1987 model year vehicles into cavity #30.
^
1981-1982 model year vehicles into cavity #37.
FIGURE 1A
C.
Instrument Panel Wiring PN 4304901 & Body Wiring PN 4331826
All 1981 Through 1987 Models
1.
Connect the red 3-way insulator of harness, PN 4304901, to the 3-way insulator that was installed to the instrument panel wiring in
Section A, Step 5.
2.
Install the two bare terminals from the overlay harness, PN 4304901, into cavity #9 of the fuse block (Figure 1-A).
3.
Make certain that the wires running behind the fuse block are dressed closely to the existing wiring to insure that no pinching will occur.
Secure the overlay harness, PN 4304901, to the troughs of the fuse block with three tie wraps, PN 6015756 (Figure 1-A).
