dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

All Technical Service Bulletins for Engine Control Module:|141983A > < Ignition System - Cold Drive Sag On During Acceleration|Page 1518
Page 5
background image

FIGURE 3 - Carburetor

16.

For manual transmission vehicles only, disable the decel fuel shutoff solenoid by disconnecting hoses to solenoid and capping the nipples on the
carburetor (Figure 3).

17.

For California manual transmission vehicles, clean the existing vacuum hose routing label surface and apply hose routing label, PN 4179847,
supplied in kit.

FIGURE 4

18.

Type information on Authorized Modification Label, PN 4275086, as illustrated in Figure 4.

Install label next to or near original VECI label.

POLICY:

Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:
Labor Operation:

08-14-05-90.........................    0.6 Hrs.

FAILURE CODE:

AM - Authorized Modification

All Technical Service Bulletins for Engine Control Module:|141983A > < Ignition System - Cold Drive Sag On During Acceleration|Page 1518