dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fuel System - Vapor Lock/ Fuel Foaming|Page 1507 > < Fuel System - Vapor Lock/ Fuel Foaming|Page 1505
Page 12
background image

W/LEFT SIDE FUEL SUPPLY ROUTINGFIGURE 4

Secure fuel hoses with 5/16" (silver) and 1/4" (black) clamps provided. Torque clamps to 10 inch pounds (Figure 4).

NOTE:

IF VEHICLE IS EQUIPPED WITH A FUEL RESERVOIR, OR A FUEL PRESSURE REGULATOR (LATE 1987
MODELS), IT MUST BE REMOVED AND REPLACED WITH FUEL RESERVOIR/FILTER, PN 4306286, SUPPLIED.

E.

Underbody Component Installation

1.

Remove the parking brake cable from the bracket and push it to the side to allow clearance for the following operations:

2.

Disconnect the fuel gauge wire, fuel supply and fuel return hoses from the fuel tank gauge unit. Drain the fuel tank and remove the tank
from the vehicle following the procedure given in the service manual.

Fuel System - Vapor Lock/ Fuel Foaming|Page 1507 > < Fuel System - Vapor Lock/ Fuel Foaming|Page 1505