Shadow L4-135 2.2L SOHC VIN D FI (1992)
Ignition Hall Effect Sensor: Service and Repair
Distributor Cap
Hall Effect Pickup Assembly
Removal
1.
Remove splash shield and distributor cap.
2.
Remove rotor.
3.
Remove Hall effect pick-up assembly.
Installation
Note:
When installing Hall effect assembly make sure pick-up leads are correctly routed to avoid damage.
1.
Place pick-up assembly into distributor housing.
2.
Install distributor rotor.
3.
Install cap and splash shield. Refer to Distributor Installation.