Shadow L4-135 2.2L SOHC VIN D FI (1992)
position and tighten crossover cable adjusting screw to 4.5 Nm (70 in. Lbs.).
CAUTION:
DO NOT LEAN ON OR APPLY A SIDE TO SIDE LOAD TO THE SHIFT LEVER WHEN TIGHTENING THE ADJUSTING SCREW.
D.
Reinstall all hardware removed in Step A.
8.
Test drive the vehicle to ensure proper shifting. Test for complete clutch disengagement by checking for excessive "spin down" time (maximum 5
seconds). To test for excessive "spin down" time, place the transaxle in neutral with the engine idling and the clutch engaged, then fully depress
the clutch pedal and shift into reverse. If the transaxle grinds after waiting 5 seconds before attempting to shift the transaxle into reverse, a clutch
malfunction is indicated and requires further diagnosis. Refer to Section 6 of the appropriate Service Manual.
Parts and Labor
PARTS REQUIRED:
1
4798366
Spring, Detent
AR
4531302
Detent, Roller
2
6502049
Bolts, Gear Shift Cover Shoulder
2
6501370
Bolts, Gear Shift Cover
2
6500318
Bolts, Gear Shift Cover
AR
4318083
Mopar Gasket Maker
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
21-75-36-90
1.6 Hrs.
FAILURE CODE:
P8 - New Part