Shadow L4-153 2.5L SOHC Turbo (1989)
FIGURE 1
1.
As illustrated in Figure 1, the vacuum control system check valve is located at the master cylinder power booster vacuum fitting.
2.
Disconnect the check valve from the power booster vacuum fitting.
3.
Disconnect the plastic vacuum line from the check valve, being careful not to damage the rubber fitting at the end of the vacuum line.
4.
Insert the check valve into the vacuum line rubber fitting and connect to the power booster vacuum fitting.
5.
Start engine and check the system vacuum leaks.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Labor Operation No.
24-50-47-90 . . . . . . . . . . .0.2 Hrs.
(AA, AC, AG, AE, AJ, AK, AL, AN, AP)
24-50-47-90 . . . . . . . . . A/T (AQ)
FAILURE CODE:
08 - Blocked