dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fuel Injector Cleaning Procedure|Page 2384 > < Fuel Injector Cleaning Procedure
Page 1
background image

Fuel Injector: Service and Repair
Fuel Injector Replacement

Warning:  The fuel system is under constant pressure, even when the engine is OFF. Always release fuel pressure before servicing any fuel
system component.
   

Removal

1.

Release fuel system pressure.  

2.

Disconnect negative battery terminal, and remove air cleaner.

3.

Remove the screw holding down the injector cap and with 2 small screwdrivers, lift the top cap off the injector.

Fuel Injector Removal

4.

Place a small screwdriver in the hole in the front of the electrical connector and gently pry the injector from the throttle body. Make sure the
injector O-ring comes out of the throttle body with the injector.

Fuel Injector Cleaning Procedure|Page 2384 > < Fuel Injector Cleaning Procedure