Shelby Charger L4-135 2.2L SOHC (1984)
Tighten fuel rail-to-manifold screws to 200-300 inch pounds.
Attach pressure regulator bracket to intake manifold and tighten attachment screws to 85-125 inch pounds (1985 models only).
6.
Attach fuel rail-to-valve cover bracket and tighten screw to 19-29 inch pounds (Figure 1).
7.
Start vehicle and inspect for fuel leaks.
8.
Type information on Authorized Modification Label as illustrated.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Labor Operation No.
09-50-17-90 . . . . . . . . . . . . . . . . . . . . . . . .0.3 Hrs.
FAILURE CODE:
AM -Authorized Modification