Spirit L4-153 2.5L SOHC VIN K TBI (1993)
^
If there is good contact, check for ignition voltage at cavity J of the red connector.
2.
If there is voltage, check for continuity at cavity H of the black connector.
^
If there is continuity, replace the printed circuit board.
If the Temperature, Fuel, and Voltage gauges appear to be malfunctioning, remove the cluster assembly and check the following:
1.
Check for good pin contact between the wire harness and the printed circuit board.
^
If there is good contact, check for ignition voltage at cavity J of the red connector.
2.
If there is voltage, check for continuity at cavity H of the black connector.
^
If there is continuity, replace the printed circuit board.