Spirit V6-181 3.0L SOHC VIN 3 FI (1993)
Rear Door Window Glass Weatherstrip: Service and Repair
Rear Door Glass Run Weatherstrip
REMOVAL
1. Remove door belt moulding and weatherstrip assembly.
2. Pull door glass run weatherstrip from forward lower channel and upper door frame back to division channel.
3. Separate glass run weatherstrip from door.
INSTALLATION
1. Insert glass run weatherstrip into top of glass opening upper channel. Align molded corner of weatherstrip to upper front corner of glass opening.
2. Push weatherstrip into upper rear corner of door frame above division channel.
3. Install door belt moulding and weatherstrip assembly.
