Spirit R/T L4-135 2213cc 2.2L DOHC Turbo VIN A FI (1992)
Fig. 5 Fuel Supply & Return Hose Connections
11.
Remove fuel supply and return hose quick connect at fuel tube assembly. Wrap shop towels around hoses to catch any gasoline spillage.
12.
Remove front engine mount through bolt and rotate engine forward away from cowl.
13.
Remove coolant and oil lines from turbocharger, then remove wastegate rod-to-gate retaining clip.
14.
Remove turbo retaining nuts, then disconnect oxygen sensor electrical connector and vacuum lines.
15.
Raise and support vehicle, then remove the right front wheel and tire assembly.
16.
Remove turbo to block support bracket, then the driveshaft assembly.
17.
Separate oil drain back tube from turbo housing and remove fitting.
18.
Disconnect exhaust pipe from turbo, then the remaining turbo to manifold retaining nut.
19.
Remove lower coolant line and inlet fitting, then remove turbocharger.
20.
Remove eight intake manifold screws and washers, then the intake manifold.
21.
Remove eight exhaust manifold retaining nuts, then the exhaust manifold.
22.
Reverse procedure to install, noting the following:
a. Use new manifold gaskets.
b. Use anti-seize compound on all threads.
c. Torque bolts and nuts to proper specifications.
