Sprinter 2500 L5-2.7L DSL Turbo (2003)
Seat Heater Relay: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. The heated seat relay is located in the fuse block, under the drivers seat. Refer to wiring for detailed location.
3. Grasp the heated seat relay firmly and pull it straight out from the fuse block. A slight rocking motion will aid in removal.
INSTALLATION
1. Grasp the heated seat relay firmly and push it straight in the fuse block.
2. Reconnect the battery negative cable.
