Sprinter 2500 V6-3.0L DSL Turbo (2008)
Center Sliding Door Rail: Service and Repair
Service Manual
Removal
REMOVAL
1. Remove center roller arm. See: Center Sliding Door Roller/Service and Repair/Service Manual/Removal See: Lower Sliding Door Roller/Service
and Repair/Removal
2. Remove quarter trim panel.
3. Remove the nuts.
4. Remove the front bolts.
5. Remove the screws and remove the center track end piece.
6. Using a heat gun or equivalent, heat track up to approximately 60° C (140° F).
7. Remove center track.
Installation
INSTALLATION
1. Thoroughly clean all residue from the center track attachment area of the door.
2. Wipe area clean with a 50% solution of water and alcohol and wipe dry.