Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
Antenna, Radio: Service and Repair
Antenna Body & Cable
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the portion of the headliner (1) over the front seats.
3. Disconnect the antenna and electrical connections near the windshield (4).
4. Remove the mounting nut (2).
5. Remove the antenna assembly from the roof and pull wire harness and cable (3) through roof opening.
Installation
INSTALLATION
1. Feed wire harness and cable (3) through roof opening and position antenna to roof panel.
2. Install and tighten antenna mounting nut (2).
3. Connect the antenna and electrical connections near the windshield (4).
4. Install the headliner (1).
5. Connect the battery negative cable.