Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
1. Disconnect and isolate battery negative cable.
2. Remove trim panel.
3. Remove the screws and remove the latch from door.
4. Disconnect electrical connector, if equipped.
5. Disconnect control cable.
Installation
INSTALLATION
1. Connect control cable.
2. Connect electrical connector, if equipped.
3. Position latch in door and install screws.
4. Tighten screws to 10 Nm (89 in. lbs.).
5. Install trim panel.
6. Connect battery negative cable.