Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
Parking Brake Lever: Service and Repair
Installation
INSTALLATION
1. Install the hand brake lever (5).
2. Reconnect the hand brake electrical switch and the wiring harness to the hand brake lever.
3. Install the bolts (5) on the hand brake lever. Tighten to 62 Nm (46 ft. lbs.).
4. Install the front brake cable (3) to the hand brake lever (4).
5. Connect the front brake cable (2) to the pulley unit.
6. Install the cover (1) to the hand brake lever (4).
