Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
32. Install the engine cover.
33. Connect negative battery cable.
34. Start engine, allow to warm, turn engine off and inspect for leaks.
Camshaft - Right
RIGHT
1. Clean all mating surfaces.
2. Lubricate camshafts with Mopar(R) Engine Oil Supplement, or equivalent.
3. Carefully install camshafts onto cylinder head journals and align the camshaft gear timing marks.
4. Install the camshaft retainers and tighten each retaining bolt to 9 Nm (80 in. lbs.).
NOTE: If the camshaft endplay is not within specification, replace the cylinder head and cylinder head cover.
